#

## Retrofitting an old PEAR industrial CNC

I’ve been using this old PEAR CNC machine for many years now. It was one of the first computer-controlled industrial CNC machines to be made available on the market and, in spite...
Read More

## We are back!

In these months of pandemic and social distancing, we’ve been working hard to bring you some new projects! We will soon release a new CNC controller suitable for all of you who...
Read More

## Shop is open!

After weeks of hard work to design, test and improve our idea, we have started a (small) production batch. For this initial run, we have decided to bundle a complete kit that...
Read More

## Repairing and retrofitting an old CNC

https://usercontent.one/wp/www.cnc4fun.com/wp-content/uploads/2019/12/Prova-funzionamento-conversione-1.mp4?media=1634134136 This is an example of how we repaired and reconverted an old CNC that belongs to a friend using our CNC4FUN boards. We will release the updated source codes within the...
Read More

## Web interface

In order to improve the user experience, besides the hardware I’ve also decided to make some changes to the original firmware. Here below you will find some screenshots of what I added...
Read More

## The assembly is almost done!

Although the time at our disposal for this project is not much, we are doing our best to assemble the boards and prepare the internal firmware for you, so that we’ll soon...
Read More

## The boards have just arrived!

The first batch of boards has just been delivered to us! We are ready for assembly and production. Stay tuned!
Read More

## The boards are updated to 1.1 version!

Here’s a recap of the situation: After the first tests, everything seems to be working fine. As shown in the videos that I posted in the past few weeks, the controller has...
Read More

## Converting an old Mach3 CNC to ESP32-GRBL

This time the test is performed by connecting the two boards (motherboard + expansion card) on a big CNC to convert it from Mach 3 to ESP32-GRBL! Even this test has been...
Read More

## Testing the boards on a self-made laser-cutter

The testing phase of all the boards’ functions goes on! This time we will try to control the laser cutter, which I built myself refurbishing an old pick-and-place machine for SMD components....
Read More
Copyright © All Rights Reserved.

This website uses cookies. By continuing to use this site, you accept our use of cookies.